|
Post by jonmac on Mar 17, 2013 22:43:31 GMT -12
Hi All, Sorry to intrude on the Seagull site, but I thought, as it's with other outboards it would be almost at home. I recently rebuilt a Victa Jet. It took a while as I had no manual or idea aboutwhat to do. So I took my time, documented everything and this is the end result . . . jonmac Attachments:
|
|
|
Post by Rex NZ on Mar 18, 2013 6:27:49 GMT -12
Jonmac
Very nice
I've long been after one of these. However they are very scarce here in NZ
|
|
cobbadog
New Member
Woof Woof !
Posts: 32
|
Post by cobbadog on Mar 20, 2013 18:54:41 GMT -12
Very nice work there Jonmac.
|
|
|
Post by dougal on Feb 10, 2017 10:22:11 GMT -12
After information about victajet just bought one got it running but bottom bush is worn out I have tried pulling it apart .But its not working I can get the bottom apart but there doesn't seem to be enough room to split the impellor and shaft from the motor . There seams to be a roll pin or something similar that joins them. I don't want to damage it. Thank you Dougal
|
|